Pellet Stove Furnace
Pellet stoves can be purchased as freestanding units or fireplace inserts that give your home the appearance of an old-fashioned fireplace that burns wood. They are available as freestanding units or fireplace inserts that give your home the appearance of a traditional wood-burning fireplace.
The auger transports pellets from the hopper into the combustion chamber, where they are burnt and generate heat. Sensors are used to monitor the fire and adjust its speed of operation to keep your desired room temperature.
1. Energy Efficiency
Pellet stoves make use of renewable, non-toxic fuel made of compressed sawdust and other substances. They are typically put in landfills, but can also be used to create a clean and efficient source of heat. They can help homeowners cut down on their energy use and consequently greenhouse gas emissions. Many pellet stove owners say they have recouped their initial investment in only several years with lower heating bills.
Pellets are stronger and more compressed than natural wood, which makes them more efficient in burning. They also produce much less creosote than traditional fireplaces that burn wood. Additionally, they are packaged in plastic bags that keep out moisture and require less frequent cleaning.
Pellet stoves, like other heating systems, must be sized and vented properly. A skilled technician can evaluate your venting needs and space requirements to ensure the best results.
In the process of installation, a hearth is built in accordance with your specifications. Then, the vent is installed through a hole pre-cut in the exterior of your home. The vent can be positioned through a sidewall or roof depending on your preference and local laws.
Once the vent and hearth are finished and the stove is ready to be plugged in and turned on. Some manufacturers provide a remote control that makes starting and maintaining the fire simple and others include sensors that monitor airflow, combustion and flue temperatures, as well as pressure. When the system detects it needs more or less pellets, it tells the auger to accelerate or slow down in line with the need.
Each stove comes with a hopper for storage that holds between 35 and 130 pounds of pellets until they're needed. The size of the hopper determines how often you'll need to refill your stove. Larger hoppers allow for longer periods before a refill is required. A grille draws air from the room, passes it through the heat exchanger and then blows heated air through the living space through convection. A grate or auger spreads the pellets, and a pan underneath will collect any unburnt ones along with combustion residue.
Pellet stoves are more energy-efficient than wood-burning models, but aren't as efficient as electric heaters or natural gas furnaces. Electric components that drive motorized parts of stoves require electricity. This could cause an issue in the event of power failure, although backup systems such as generators and batteries are readily available.
2. Low Maintenance
Pellet stoves can be extremely efficient, but they require some care to run correctly. Cleaning your stove and exhaust vent on a regular basis will stop the accumulation of harmful creosote, which can cause a fire or explosion that could cause damage to your stove or even your home.
A pellet stove burns natural wood particles or other materials (like nutshells, corn kernels or small pieces of scrap wood). The pellets are introduced into the combustion chamber through an electric auger. The thermostat you set controls the speed at which pellets are fed to the burner. The fire can be kept roaring or modulated lower and even extinguished in accordance with the temperature you set. The ash will be disposed in an empty ash tin underneath the burner. It can be easily removed and then disposed.
Pellets are created from the byproducts from lumber processing which could otherwise be thrown away. They are renewable resources and release significantly less particles into the air than traditional wood-burning stoves which results in a clean burning heat source. The amount of carbon monoxide, carcinogens and other harmful chemicals emitted from pellet stoves are also significantly lower than the more modern EPA certified wood stoves.
Due to the low emissions they produce, these stoves do not need to be vented through a chimney like traditional wood stoves but they must be properly vented through a wall or other exterior structure. Pellet stoves have flue ports that open from the rear or the top of the appliance. They are connected to a vent pipe that extends outside of the home.
One drawback of pellet stoves is that you need to purchase or store enough pellets to last through the winter months. On average, homeowners of a pellet stove use three tons of pellets over the course of winter season at a cost of $200 per ton. The cost can be high, but they are cheaper than purchasing firewood and transporting it to the wood-burning fireplace or stove. Make sure that you purchase enough pellets to ensure that your stove will work throughout the coldest winter months and that you have the right location to store them (preferably cool, dry and away from the ground).
3. Reduced Carbon Footprint
Pellet stoves make use of renewable biomass fuel to generate heat, reducing dependence on finite fossil fuels. This reduces carbon footprints and diversifies energy sources for homes.
Even the latest wood stoves that are EPA certified emit significantly less carbon dioxide than pellet stoves. The emissions from pellet stoves are significantly lower than the ones from gas furnaces. Pellets can be made of sawdust or bark, as well as other lumber remnants. They could also include soybeans, corn, or agricultural waste. When they are burned, they emit less particles, which can cause respiratory problems and allergic reactions, carcinogens and nitrous dioxide.
The feed system is the major difference between pellet stoves and wood stove. Pellet stoves have hoppers which contain the pellets. When the thermostat or sensors indicate the room needs heating, the auger turns. The pellets are placed in the combustion chamber and burn to produce heat. The combustion chamber's air is then pumped through a heat exchanger which transmits heat to the blower. This process results in low emissions and no creosote buildup.
After the hopper is empty, the ash gets removed by a cyclone and deposited in an ash container. The stove also features an air circulator to move the warm, clean air throughout the living area. Most pellet stoves require minimal maintenance and feature a large viewing space for you and your loved ones to relax and enjoy the flames.
The quality of pellets is the main factor that affects pellet stove emissions. Pellets that are not of the highest quality will cause more emissions. When selecting your pellets, make sure they meet certain standards and don't contain other ingredients such as petroleum-based or urea-based products. Also, look for a manufacturer that has a warranty and will repair or replace any part in the event of a problem. If you're looking to take an even greener approach, some states allow homeowners to claim a tax deduction for installing pellet stoves. This is a great opportunity to help offset the initial cost of this type stove and makes installation more affordable.
4. Reduced Noise
Pellet stoves produce very little emissions or smoke compared to fireplaces with wood burning. A fan is used to spread heat more evenly throughout the room. This is a major reason why pellet stoves require less maintenance than wood stoves. While wood stoves must be regularly cleaned of dust and chemicals, pellet stoves only need the use of a special metal vacuum cleaner for routine cleaning.
Many manufacturers have made an effort to design their stoves to be simple to install and to operate as well as maintain. pellet stoves for rvs come in different styles to are designed to match the decor of your home. Some come with programmable thermostats remote control, as well as WIFI applications that allow you to monitor and manage your stove from anywhere in the world.
Most pellet stoves come with a large fuel hopper that can hold between 35 and 130 pounds of pellets. The pellets are then pumped into the combustion chamber using an auger. The output of heat and how hot the fire is will depend on the speed at which the pellets are fed into the burner. The hopper may be filled with hardwood pellets, composed of dense wood species like hickory and oak or softwood pellets. A lot of stoves can use biomass pellets made of switchgrass and corn. This is an environmentally friendly alternative.
Pellet stoves emit less smoke and require less maintenance because they burn a cleaner fuel than wood-burning fireplaces. They do not need a chimney and are therefore the best choice for retrofits and new construction.
Pellet stoves don't require regular cleaning of creosote or other chemical similar to wood stoves. They just require periodic inspections to ensure the proper operation and maintenance. Depending on the model, this may include regular inspections and cleaning of the accumulation of Ash or "clinker," as well as the motor and fans. Your appliance dealer can explain the proper procedures for your specific brand and model. He can also assist you to identify the right fuel for your stove and provide information regarding storage and safety.